Tuesday, September 27, 2022
Google search engine
HomeSOFTWAREHow to fix a Kernel Data Inpage error

How to fix a Kernel Data Inpage error

Death doesn’t necessarily have to be on the blue screen

The kernel data error is a Windows error code that appears on the blue screen of death (BSOD). When this error occurs, your computer will usually compile diagnostic data and restart. Your computer may crash again if the problem continues.

Kernel data inpage errors can be caused by hardware failures of memory modules or hard drives. This error may also be caused by viruses.

How does the Kernel Data Inpage Error appear?

This message will usually appear when an error occurs:

Your computer has experienced an error and must be restarted. We are just gathering some error information and will restart your computer. If you’d like to know more, you can search online later for this error: KERNEL_DATA_INPAGE_ERROR KERNEL_DATA_INPAGE_ERROR

The Kernel Data Inpage Errors: Causes

A kernel data inpage error occurs when blue screen crashes occur. It is typically caused by a problem with either the hard drive or random access memory (RAM).

These codes are associated with the error and the problems they refer:

  • 0x0000007A
  • 0xC000009C
  • 0xC000009D
  • 0xC000016A
  • 0xC0000185 Unseated or damaged cables

How to fix a Kernel Data Inpage error

Most kernel data inpage errors can be attributed to bad memory modules or hard drives. The fix involves usually locating the problem component and replacing it.

This problem causes computers to restart when they crash. Our guide will help you fix a computer that won’t turn off.

Other cases may be caused by a problem with the hard drive or memory module. These troubleshooting steps will fix your kernel data leak error.

Back up your data. You could lose important data if your hard drive is damaged. Before you start the diagnostic process, make sure you back up any files you may have. You can make copies of files that you don’t want to lose and save them on a flash drive, SD cards, or cloud storage.

  1. Inspect your memory modules and reseat them.
    Sometimes, the problem could be caused by improperly seated memory module. To rule out any potential problems and avoid unnecessary expenditures, open your computer. Check to make sure that no modules have been installed incorrectly or are loose.
    Be careful when opening computers or adjusting parts. Static electricity can permanently damage RAM components if it isn’t properly set up.
  2. Check and replace your hard drive cables.
    This is usually a sign that your drive has physical defects such as bad sector. This problem may be caused by a poorly seated hard drive cable.
    To rule out this possibility, open your computer and locate the hard drive. Also, you will need to check the connector cable that connects to your motherboard.
    Listen out for loud clicking sounds when your hard drive is in use. These noises could indicate that your hard drive is in danger of failing. You can back up your data and Replace your hard drive.
  3. You can test your memory.
    Windows 10 includes a memory diagnostic tool built in. Windows 7, Windows 8 and Windows 10 offer free options. Windows 10 offers free options for Windows 7, Windows 8, and Windows 10.
    MemTest86 is the best memory diagnostic tool. You can download it and use it to test your RAM.
    It is possible to run multiple memory diagnostic tools. If one of these tools reports a problem with your RAM, replacement is an option. This will likely fix the kernel data inpage error. However, your RAM may fail again in the future if you use any of these tools.
  4. To test your hard drive, use a program.
    You can use the Windows error-checking tool to check for any problems on your hard drive, or the command.
    Allow your diagnostic tool to try to fix any issues, such as bad sectors. If the diagnostic tool is successful, your computer should be able work normally without further kernel data corruption errors.
    14 Best Hard Drive Testing Tools (June 20,22)
  5. Unplug peripherals.
    Although this error is less common, it can still happen due to peripherals. This error can be ruled out by turning off your computer and unplugging all peripherals.
    Reconnect each device individually until the computer crashes with the kernel data error. You can either unplug the device or replace the one causing the problem.
  6. Perform a virus scan.
    A virus can corrupt files or cause kernel data inpage errors. Although it is less likely than some other options, it’s important to test. A virus scan is a good option if nothing else works. These programs will detect a virus and fix it. Next, check to see if there are kernel data inpage errors.
    You can check this problem by using our large list.

Other blue screen problems, such as the Kernel Data inpage Error

When Windows crashes, the kernel data inpage error can be one of many problems that may appear. We have a complete list of blue-screen error codes to help you solve your blue screen problem.

A general guide for fixing the bluescreen of death is also available.


  • What’s the purpose of the kernel in an operating system?
    The kernel is a program at the low level that interfaces all applications with the hardware of the computer. The kernel is essential for all your applications to work. Every operating system needs a kernel.
  • How can I fix a Windows kernel security check failure error?
    To fix the kernel security check failure error remove all peripheral devices, disable Windows auto-restart, scan for corrupt files and check your hard drive for errors. If the problem persists, you can use the Startup Repair Tool to restore the system to an earlier working point or reset it.
  • Which directory is the Linux Kernel stored?
    The /boot directory usually contains the Linux kernel. Enter in the terminal window and type /boot . You will find a file named or .




Please enter your comment!
Please enter your name here

- Advertisment -
Google search engine

Most Popular

Recent Comments